China 250mm-800mm Diamond Segments Granite Cutting

Diameter (mm/Inch)	Segment Size (mm)			Segment No. (pcs/set)	Welding Method	Segment Structure
Diameter (mm/Inch)	Length	Width	Height	Segment No. (pcs/set)	Welding Method	Segment Structure
250mm(10")	40	2.6/2.8	10/12	18	Silver Welded	Sandwich or 1-Layer
300mm(12")	40	3.0/3.2	10/12/15	21
350mm(14")	20/40	3.2/3.4	10/12/15/20	24/25
400mm(16")	20/40	3.2/3.4/3.6/3.8	10/12/15/20	28
450mm(18")	40	3.6/3.8/4.0	10/12/15/20	32
500mm(20")	20/40	4.2	10/12/15/20	36
550mm(22")	40	4.2/4.4	10/12/15/20	38
600mm(24")	20/40	4.2/4.6	10/12/15/20	42
700mm(28")	40	5.0	10/12/15/20	50
750mm(30")	40	5.5	10/12/15/20	50
800mm(32")	20/40	5.2	10/12/15/20	46

The following is different designs of granite segments with relevant height:


CD-DSG-01 Normal Segment H: 10/12/15/20mm	CD-DSG-02 Straight Groove Segment H: 12mm	CD-DSG-03 Gradient Groove Segment H: 12mm

CD-DSG-04 Step << Segment H: 12/15/20mm	CD-DSG-05 Step << with U Slot H: 15/20mm	CD-DSG-06 20mm Length with \|\| Step H: 15/20mm

CD-DSG-07 Step \|\| with U Slot H: 15/20mm	CD-DSG-08 Step \|\| Segment H: 15/20mm	CD-DSG-09 Matrix(Arix) Segment H: 10/12/15mm

Wet use only.

Welding method: Silver Welding.

The above specification & photos is only for Reference, other specification or design can be ordered by customers.

Warning:

No Fire Welding!

Please use high frequency Silver Welded machine instead of Fire to make the brazing, the welding time is only a few seconds, otherwise the diamond inside the segments will probably be damaged by the high temperature, then the cutting performance will be Reduced!