China Marble profiling cutting Diamond Wire Saw

· To cut special shape in short time;
· Smooth cutting & more precise;
· Low power consume and less raw material waste;
· Low noise and Less pollution;
· Easy manipulation and with low cost.

Diameter (mm)	Code No.	Fixing Type	Beads No. pcs/M	Material type	Linear speed (m/s)	Sawing speed (mm/min)	Wire life(㎡/m)
Ф9.0	DWSMP01	Plastic	33	Class 1-2 Class 3-4 Class 5	30-40 28-35 25-30	20-35 15-25 10-20	30-50 25-40 20-30
Ф8.8	DWSMP02	Plastic	33
Ф8.5	DWSMP03	Plastic	33
Ф8.2	DWSMP04	Plastic	33
Ф7.2	DWSMP05	Plastic	33

The technical information is only for reference.

Other specifications are available upon customer's requirements.

Recommendations:

· The rotation of the wire should be regularly checked.
· The worn condition of beads should be regularly inspected.
· The worn condition of connections & the beads near connections should be regularly checked. Change connections when it's needing.
· The cable tension is set in 250-300kg(Φ4-5mm cable).
· Adjust the linear speed of the wire according to the material being sawn：
    Granite class 1-2 : 25-30 m/s
    Granite class 3-4 : 22-26 m/s
    Granite class 5 : 20-24 m/s
    Marble : 30-35 m/s
    Abrasive stone：30-35 m/s
· During the sharpening of a new wire, the liner speed should be reduced 2-3 m/s from the above standard.
· Water requirement is between 15-25L/min.

Kindly Noted, when place order please inform the following:

Code No. of Diamond Wire

Diameter of the Wire (9.0mm, 8.8mm, 8.5mm, 8.2mm or 7.2mm)

Wire Type (Plastic)

Marble Type (Hard, Medium, Soft, or Abrasive)

Quantity (How many Meters)

Wire Saw Machine Power (How many KW or HP of the motor)

Expected cutting speed and life(M2)

Expected shipping date

Relevant Products: Diamond Wire Saw for Stone Cutting