|
HTC Grinding Head - 2 Round Segmented
Used for EZ Change Grinding Plate
For quick removal of any materials, bonds Hard, Medium,
or Soft available for kinds of concrete, Stone or abrasive.
|
Code No. |
Segment Size |
Segment No. |
Grit No. |
|
CD-HTC-01 |
Dia.18mm, Height 12mm |
2 |
#30,
#40,
#60,
#80,
#120,
#150,
#200,
#400 |
HTC Grinding Head - 2 Bar
Segmented
Used for EZ Change Grinding Plate
For quick removal of any materials, bonds Hard, Medium, or Soft
available for kinds of concrete, Stone or abrasive.
| Code No. |
Segment
Size |
Segment
No. |
Grit No. |
|
CD-HTC-02 |
40x10x10mm |
2 |
#30,
#40,
#60,
#80,
#120,
#150,
#200,
#400 |
About EZ Change
No more seized, rusty or broken screws;
in fact no screws are needed at all. EZchange is a revolutionary system
for lighting-fast tools changes, and as the name indicates, it is
extremely easy to change tools. The system consists of wings for
metal-bond and Resin-bond diamond tools and a new kind of metal holder.
You use the same holder for every type of HTC tool in the EZchange
system. No need to have metal disks for all your various sets of diamond
tools!
Position the tools in the compartments on the holder and with a light
tap with a rubber hammer you’re ready to grind or polish a floor or
remove coatings. The EZchange system is available for all HTC grinding
machines.
The parts
The new tool holder and wing, the parts in the new EZchange™ system.
The perfect fit
Insert the wing in the holder tracks. There is only one way to do this.
The safe system
The tool is now prevented from being ejected forwards or backwards, the
design si so smart.
The easy system
A light tap with a rubber hammer holds the tool firmly in place. You are
ready for work!
The freedom of choice
You attach either 3 tools for a half set or 6 tools for a full set
depending on the type of floor and desired removal rate. |
 |
The above specification & photo is only for Reference, other or special specification can be ordered by customers.
Return back to the
page of Other Diamond Tools
|
:
05011664